Furnace not working? In Rochester, MN, Tonna Mechanical offers 24/7 furnace repair from NATE-certified technicians, with same-day service when you ask for it and upfront pricing before any work starts. Call 507-288-1908 any time, day or night. Before you call, a few quick checks can sometimes get your heat back on in minutes. Here is what to look for, what is safe to try yourself, and when to call a pro.
First: is it a safety problem?
Some furnace problems are emergencies. Get everyone out of the house first, then call for help from outside:
- You smell gas (a rotten-egg smell). Leave right away. Do not flip light switches or use anything that could make a spark. Once you are outside, call 911 and your gas company. Minnesota Energy Resources, which serves most of Rochester, asks customers to call its 24-hour line at 800-889-4970.
- Your carbon monoxide alarm goes off. Leave the house and call 911. Headaches, dizziness or nausea that ease when you leave the home are also warning signs.
Once the home is safe, call us and we will find and fix the cause. Minnesota law requires a working carbon monoxide alarm within 10 feet of every bedroom, so if you do not have one, now is a good time to add one.
Quick checks before you call
Many no-heat calls in Rochester come down to something simple. Try these in order:
- Check the thermostat. Make sure it is set to “heat,” set a few degrees above room temperature, and has fresh batteries if it uses them.
- Check the furnace filter. A clogged filter can make the furnace overheat and shut itself off. If you cannot see light through it, replace it.
- Check the power. Look for a tripped breaker in your electrical panel, and make sure the furnace switch (it looks like a light switch on or near the furnace) is on.
- Check the furnace door. Most furnaces will not run unless the front panel is closed tightly.
- Check the vent pipes outside. High-efficiency furnaces vent through white PVC pipes on the side of the house. After a Minnesota snowstorm, snow or ice can block them. Clear them gently by hand.
If the heat still does not come on, or the furnace starts and then shuts off again, it is time to call a technician. Do not keep restarting the furnace, and do not remove panels beyond the filter door.
Common furnace problems we fix
Furnace blowing cold air
First make sure the thermostat fan is set to “auto,” not “on.” If it is, the cause is often a dirty flame sensor, a failed igniter, an overheating furnace (often from a dirty filter), or a clogged condensate drain on a high-efficiency furnace.
Furnace turns on and off too often
Short cycling can come from a dirty filter, a bad flame sensor, a thermostat in the wrong spot or a furnace that is too big for the home. It wears out parts faster and raises your gas bill.
Furnace not heating enough
If some rooms are cold or the furnace runs all the time without keeping up, the cause may be restricted airflow, a failing blower motor, closed or blocked vents, or ductwork problems.
Strange noises
Banging, rattling, squealing or grinding usually points to a loose part, a worn blower motor or bearing, or delayed ignition. Noises often get worse, so it pays to have them checked early.
Yellow or flickering burner flame
A healthy gas flame is mostly blue. A yellow, lazy or flickering flame can mean the burners are not getting enough air and the furnace may be making carbon monoxide. Turn the furnace off and call right away.
What to expect when Tonna fixes your furnace
- 24/7 service. We answer no-heat calls nights, weekends and holidays. See our 24/7 support.
- Same-day appointments when you ask for one.
- NATE-certified technicians who work on all furnace makes and models.
- Stocked trucks, so most furnaces are fixed on the first visit.
- Upfront pricing. We explain what we found and your options, and we do no work until you approve the price.
- No upsells. We recommend only what your furnace needs.
Repair or replace?
If your furnace is less than about 10 years old and the problem is small, repairing it usually makes sense. Replacement is worth a look if your furnace is around 15 years or older, needs repairs every winter, has a cracked heat exchanger, or your heating bills keep climbing. We give honest advice and free second opinions, so if another company told you that you need a new furnace, we are happy to take a look.
If replacement does make sense, see how much a new furnace costs in Minnesota and the 2026 rebates in our area.
How to avoid a breakdown next winter
- Change your filter regularly, more often if you have pets or someone with allergies.
- Get a fall tune-up. A technician cleans the burners and flame sensor, checks the heat exchanger and tests safety controls, which catches most problems before the first cold snap. Learn about furnace maintenance.
- Keep the area around your furnace clear, and keep outdoor vent pipes free of snow and ice.
- Join the “Just Right” Comfort Club for annual maintenance, reminders and priority service.
Get your heat back on
Tonna Mechanical has kept Rochester and southern Minnesota warm since 1976. We repair furnaces in Rochester, the Owatonna area, Apple Valley, Lakeville, Rosemount, Farmington and Northfield. Call 507-288-1908 24/7 or schedule furnace repair online.
Frequently asked questions
Who does furnace repair in Rochester, MN?
Tonna Mechanical has repaired furnaces in Rochester and southern Minnesota since 1976. We offer 24/7 emergency furnace repair, same-day service when you ask for it, and NATE-certified technicians who work on all makes and models. Call 507-288-1908.
Is there 24-hour furnace repair in Rochester?
Yes. Tonna Mechanical answers no-heat calls 24 hours a day, 7 days a week, including nights, weekends and holidays, in Rochester, Owatonna and the South Metro.
How much does furnace repair cost?
It depends on what is wrong and which parts are needed. A clogged filter or a tripped switch costs nothing to fix yourself, while a failed blower motor or control board costs more. Tonna gives you an upfront price before any work starts, so there are no surprises.
Why is my furnace blowing cold air?
The most common causes are a thermostat fan set to “on” instead of “auto,” a dirty filter that makes the furnace overheat and shut off, a dirty flame sensor or failed igniter, or, on high-efficiency furnaces, a clogged condensate drain.
Should I repair or replace my furnace?
Repair usually makes sense for a furnace under about 10 years old with a small problem. Replacement is worth considering if the furnace is around 15 years or older, needs repairs often, or has a cracked heat exchanger. We give honest advice and free second opinions.
How can I prevent furnace breakdowns?
Change your filter regularly, keep the area around the furnace clear, and have the furnace tuned up every fall. Tonna’s “Just Right” Comfort Club includes annual maintenance and priority service.